Schultz & Larsen | Hunter Traveller Composite
The Hunter Traveller is now available with a Composite/Synthetic Stock. The action has identical specification to the the regular Hunter Traveller Walnut, however the new composite stock design introduces a raised cheek rest. The Hunter Traveller switch-barrel system features two access holes in the side of the stock which allow fast barrel removal without the need to remove the action and detachable bottom metal (DBM) from the stock. Insert the 4mm Allen wrench, slacken the barrel securing bolts by a quarter turn after bolt is loosened and pull out the barrel. The stock is relieved to allow the thicker breech portion of the barrel to move forward in the stock.
The Hunter Traveller Composite is currently available in Right hand only. Total weight of the Hunter Traveller Composite, with 56cm Standard Barrel and steel 3-round magazine and Picatinny rail is 3,500g (1,155g Stock Only)
Recoil Pad
All of the Schultz & Larsen Classic Synthetic rifles come with a black rubber recoil pad fitted. The “Schultz & Larsen” logo is embossed onto the pad.
Grip Cap
The Schultz & Larsen Classic Synthetic features a black synthetic grip cap with the “S&L” embossed on it.
Scope Mounting
The top of the Classic action is milled to accept the Schultz & Larsen ‘Slide & Lock” scope mounts, incorporating Summer and Winter scope position. For those who prefer a different mount, the action is drilled and tapped to accept Weaver or other bases. The radius of the action is 17mm and the hole spacing 22mm
Barrel Removal Made Quick and Simple
The barrel can be unlocked through the holes located on the right of the stock. The Classic Traveller has been designed with fast access for barrel changing in mind. Simply slacken the two screws and ease the barrel forward. Be careful! If you pull too hard the barrel will jump forward and may jam in the barrel channel damaging the stock.
Sling Swivels
There are two sling swivel studs pre-fitted to the Classic Synthetic. One is at the rear, on the bottom of the stock in front of the recoil pad, and one on the forearm. The swivel studs accept sling swivels of 8mm wide, with 3.5mm pin diamter.
Switch Barrel System
The Classic Traveller has a switch barrel system allowing the barrel to be changed for any other in its calibre group with just a simple wrench. The standard bolt can be used with all calibres in the standard calibre group but if changing to a Magnum calibre you will need to change the bolt.
Safe Construction
Safety has top priority with all locking parts designed and tested to withstand at least three times normal load. In the case of an overload resulting in a primer blow-out or case rupture, the high pressure gas can escape through holes in the front of the action and on the side of the bolt. This coupled, with the extremely tight fit of the bolt and action, ensures that the shooter is not injured.The safety catch is three position and locks the bolt and blocks the firing pin. The centre position allows unloading of the rifle whilst the safety is engaged.
The Classic Bolt
The bolt lift is 60º making it a fast an effective mechanism. The perfectly machined bolt glides into the action effortlessly and locks into the barrel once closed. The Classic’s bolt handle is a straight arm, dovetailed into the bolt body. There are two variations of bolt, one is typically marked “S” for Standard Calibres and the other is marked “M” for Magnum Calibres.
Additional Information
CALIBRES | STANDARD
| .22-250 (K) | 6mm XC (1 Skud) |
| .243 Win (K) | .25-06 (L) |
| 6.5×47 Lapua (K) | 6.5×55 SE (L) |
| 6.5-284 (M) | 6.5 Creedmoor (K) |
| .270 Win (L) | 7×57 (L) |
| 7×64 (L) | 7mm-08 (K) |
| .308 Win (K) | .30-06 (L) |
| 9.3×62 (L) | |
Calibres | Magnum (Magnum Bolt Required)(Magazine Sizes in brackets – K=Standard, L=Long, M=Magnum, KM=Short Magnum)
| 7mm Rem Mag (M) | .300 Win Mag (M) |
| .300 WSM (KM) | .270 WSM (KM) |
| .338 Win Mag (KM) | .358 Norma Mag (M) |